tier_2 conversion
Convert STM-1 (signal) to IDE (DMA mode 2)
Convert STM-1 (signal) to IDE (DMA mode 2) with a verified formula, worked example, conversion table, precision guidance, and reverse conversion.
STM-1 (signal) to IDE (DMA mode 2)
STM-1 (signal) to IDE (DMA mode 2)
Quick answer
1 STM-1 (signal) = 1.17108433735 IDE (DMA mode 2).
Formula
IDE (DMA mode 2) = STM-1 (signal) × 1.171084337349391257137349398
Precision
The stored factor is used at full decimal precision; round only the displayed result to the precision required by the task.
How to convert STM-1 (signal) to IDE (DMA mode 2)
- Enter a value in STM-1 (signal).
- The conversion is linear, so each STM-1 (signal) is worth 1.171084337349391257137349398 IDE (DMA mode 2).
- Round the displayed IDE (DMA mode 2) value only when needed.
About these units
STM-1 (signal) is a unit used in data transfer rate conversions. Data transfer rate measures digital information transmitted per unit of time. IDE (DMA mode 2) is a unit used in data transfer rate conversions. Data transfer rate measures digital information transmitted per unit of time.
Explore related conversions
- Convert IDE (DMA mode 2) to STM-1 (signal)
- Convert STM-1 (signal) to bit/second
- Convert STM-1 (signal) to byte/second
- Convert STM-1 (signal) to E.P.T.A. 1 (payload)
- Convert STM-1 (signal) to E.P.T.A. 1 (signal)
- Convert STM-1 (signal) to E.P.T.A. 2 (payload)
- Convert bit/second to IDE (DMA mode 2)
- Convert byte/second to IDE (DMA mode 2)
- Convert E.P.T.A. 1 (payload) to IDE (DMA mode 2)
STM-1 (signal) to IDE (DMA mode 2) conversion table
| STM-1 (signal) | IDE (DMA mode 2) |
|---|---|
| 0 STM-1 (signal) | 0e-27 IDE (DMA mode 2) |
| 1 STM-1 (signal) | 1.17108433735 IDE (DMA mode 2) |
| 5 STM-1 (signal) | 5.85542168675 IDE (DMA mode 2) |
| 10 STM-1 (signal) | 11.7108433735 IDE (DMA mode 2) |
| 25 STM-1 (signal) | 29.2771084337 IDE (DMA mode 2) |
| 100 STM-1 (signal) | 117.108433735 IDE (DMA mode 2) |
Frequently asked questions
How do I convert from STM-1 (signal) to IDE (DMA mode 2)?
The conversion is linear, so each STM-1 (signal) is worth 1.171084337349391257137349398 IDE (DMA mode 2).
What formula does CalculatorHQ use for STM-1 (signal) to IDE (DMA mode 2)?
IDE (DMA mode 2) = STM-1 (signal) × 1.171084337349391257137349398
How should I round the result?
The stored factor is used at full decimal precision; round only the displayed result to the precision required by the task.
Can I convert IDE (DMA mode 2) back to STM-1 (signal)?
Yes. Use the linked reverse conversion, whose formula is validated against this pair with round-trip tests.