tier_2 conversion
Convert SCSI (LVD Ultra80) to IDE (UDMA mode 3)
Convert SCSI (LVD Ultra80) to IDE (UDMA mode 3) with a verified formula, worked example, conversion table, precision guidance, and reverse conversion.
SCSI (LVD Ultra80) to IDE (UDMA mode 3)
SCSI (LVD Ultra80) to IDE (UDMA mode 3)
Quick answer
1 SCSI (LVD Ultra80) = 1.6 IDE (UDMA mode 3).
Formula
IDE (UDMA mode 3) = SCSI (LVD Ultra80) × 1.6
Precision
The stored factor is used at full decimal precision; round only the displayed result to the precision required by the task.
How to convert SCSI (LVD Ultra80) to IDE (UDMA mode 3)
- Enter a value in SCSI (LVD Ultra80).
- Multiply the SCSI (LVD Ultra80) value by 1.6 to obtain IDE (UDMA mode 3).
- Round the displayed IDE (UDMA mode 3) value only when needed.
About these units
SCSI (LVD Ultra80) is a unit used in data transfer rate conversions. Data transfer rate measures digital information transmitted per unit of time. IDE (UDMA mode 3) is a unit used in data transfer rate conversions. Data transfer rate measures digital information transmitted per unit of time.
Explore related conversions
- Convert IDE (UDMA mode 3) to SCSI (LVD Ultra80)
- Convert SCSI (LVD Ultra80) to bit/second
- Convert SCSI (LVD Ultra80) to byte/second
- Convert SCSI (LVD Ultra80) to E.P.T.A. 1 (payload)
- Convert SCSI (LVD Ultra80) to E.P.T.A. 1 (signal)
- Convert SCSI (LVD Ultra80) to E.P.T.A. 2 (payload)
- Convert bit/second to IDE (UDMA mode 3)
- Convert byte/second to IDE (UDMA mode 3)
- Convert E.P.T.A. 1 (payload) to IDE (UDMA mode 3)
SCSI (LVD Ultra80) to IDE (UDMA mode 3) conversion table
| SCSI (LVD Ultra80) | IDE (UDMA mode 3) |
|---|---|
| 0 SCSI (LVD Ultra80) | 0.0 IDE (UDMA mode 3) |
| 1 SCSI (LVD Ultra80) | 1.6 IDE (UDMA mode 3) |
| 5 SCSI (LVD Ultra80) | 8.0 IDE (UDMA mode 3) |
| 10 SCSI (LVD Ultra80) | 16.0 IDE (UDMA mode 3) |
| 25 SCSI (LVD Ultra80) | 40.0 IDE (UDMA mode 3) |
| 100 SCSI (LVD Ultra80) | 160.0 IDE (UDMA mode 3) |
Frequently asked questions
How do I convert from SCSI (LVD Ultra80) to IDE (UDMA mode 3)?
Multiply the SCSI (LVD Ultra80) value by 1.6 to obtain IDE (UDMA mode 3).
What formula does CalculatorHQ use for SCSI (LVD Ultra80) to IDE (UDMA mode 3)?
Multiply the SCSI (LVD Ultra80) value by 1.6 to obtain IDE (UDMA mode 3).
How should I round the result?
The stored factor is used at full decimal precision; round only the displayed result to the precision required by the task.
Can I convert IDE (UDMA mode 3) back to SCSI (LVD Ultra80)?
Yes. Use the linked reverse conversion, whose formula is validated against this pair with round-trip tests.