tier_2 conversion
Convert IDE (PIO mode 1) to STM-1 (signal)
Convert IDE (PIO mode 1) to STM-1 (signal) with a verified formula, worked example, conversion table, precision guidance, and reverse conversion.
IDE (PIO mode 1) to STM-1 (signal)
IDE (PIO mode 1) to STM-1 (signal)
Quick answer
1 IDE (PIO mode 1) = 0.267489711934 STM-1 (signal).
Formula
STM-1 (signal) = IDE (PIO mode 1) × 0.2674897119341634317695473253
Precision
The stored factor is used at full decimal precision; round only the displayed result to the precision required by the task.
How to convert IDE (PIO mode 1) to STM-1 (signal)
- Enter a value in IDE (PIO mode 1).
- Multiply the IDE (PIO mode 1) value by 0.2674897119341634317695473253 to obtain STM-1 (signal).
- Round the displayed STM-1 (signal) value only when needed.
About these units
IDE (PIO mode 1) is a unit used in data transfer rate conversions. Data transfer rate measures digital information transmitted per unit of time. STM-1 (signal) is a unit used in data transfer rate conversions. Data transfer rate measures digital information transmitted per unit of time.
Explore related conversions
- Convert STM-1 (signal) to IDE (PIO mode 1)
- Convert IDE (PIO mode 1) to bit/second
- Convert IDE (PIO mode 1) to byte/second
- Convert IDE (PIO mode 1) to E.P.T.A. 1 (payload)
- Convert IDE (PIO mode 1) to E.P.T.A. 1 (signal)
- Convert IDE (PIO mode 1) to E.P.T.A. 2 (payload)
- Convert bit/second to STM-1 (signal)
- Convert byte/second to STM-1 (signal)
- Convert E.P.T.A. 1 (payload) to STM-1 (signal)
IDE (PIO mode 1) to STM-1 (signal) conversion table
| IDE (PIO mode 1) | STM-1 (signal) |
|---|---|
| 0 IDE (PIO mode 1) | 0e-28 STM-1 (signal) |
| 1 IDE (PIO mode 1) | 0.267489711934 STM-1 (signal) |
| 5 IDE (PIO mode 1) | 1.33744855967 STM-1 (signal) |
| 10 IDE (PIO mode 1) | 2.67489711934 STM-1 (signal) |
| 25 IDE (PIO mode 1) | 6.68724279835 STM-1 (signal) |
| 100 IDE (PIO mode 1) | 26.7489711934 STM-1 (signal) |
Frequently asked questions
How do I convert from IDE (PIO mode 1) to STM-1 (signal)?
Multiply the IDE (PIO mode 1) value by 0.2674897119341634317695473253 to obtain STM-1 (signal).
What formula does CalculatorHQ use for IDE (PIO mode 1) to STM-1 (signal)?
STM-1 (signal) = IDE (PIO mode 1) × 0.2674897119341634317695473253
How should I round the result?
The stored factor is used at full decimal precision; round only the displayed result to the precision required by the task.
Can I convert STM-1 (signal) back to IDE (PIO mode 1)?
Yes. Use the linked reverse conversion, whose formula is validated against this pair with round-trip tests.